Template parameters
If you should find yourself editing templates, these are some of the possible parameters you may use and an accompanying brief description.
Name | Section | Description |
---|---|---|
bAllowScoreEdit | SETUP | Use scorestyle-edit even for single voices ["1"] |
bAudibleLegato | SOUND | legato-bows audible ["0"] |
bAudibleMIDI | SOUND | MIDI-specific items audible ["1"] |
bAudibleTempo | SOUND | Tempochanges audible ["1"] |
bAutoBass | SOUND | Automatic bass accompanimentpart constructed from chordsymbols ["1"] |
bAutoChords | SOUND | Automatic chord accompanimentpart constructed from chordsymbols ["1"] |
bAutoCorrect | SETUP | Autocorection of fixed bar lines ["1"] |
bAutoEqualize | SETUP | Equalize all parts within a score by adding 'disposable rests' (gray) ["1"] |
bAutoOrphan | LAYOUT | Justify unsufficient filled lines partially ["1"] |
bBeepOnError | SETUP | Emit sound on errorsituations ["1"] |
bConfirmQuit | SETUP | Confirm before quitting MusiCAD ["0"] |
bCopyText | SETUP | Copy text when creating a new part ["0"] |
bDCAudible | SOUND | DaCapo construction audible ["1"] |
bDrumSync1 | SETUP | Percussion syncopated on beat 1 ["0"] |
bDrumSync2 | SETUP | Percussion syncopated on beat 2 ["0"] |
bDrumSync3 | SETUP | Percussion syncopated on beat 3 ["0"] |
bDrumSync4 | SETUP | Percussion syncopated on beat 4 ["0"] |
bDynAudible | SOUND | Dynamics audible ["1"] |
bFastRepaint | SETUP | Redraw only the changed area ["0"] |
bGhostScript | SETUP | Use GhostScript when printing. (without pictures) ["0"] |
bGraceAnticipate | SOUND | use anticipating grace notes ["0"] |
bGraceAudible | SOUND | Make note/MIDI enhancements audible ["1"] |
bGraceChromatic | SOUND | Use chromatic beautifying notes ["1"] |
bGraceSlow | SOUND | use slow grace notes ["0"] |
bHideGraceNotes | LAYOUT | Hide all grace notes without actually removing them ["0"] |
bHideNotes | LAYOUT | Audible note duration when entering notes ["0"] |
bLastRecall | SETUP | Recall last used melody on start ["1"] |
bMatchArcs | SETUP | Verify 'begin-tie' and 'end-tie' ["0"] |
bMIDIEcho | SETUP | "Echo" every receivedMIDI-note to MIDI-playback. ["1"] |
bMIDIText | SETUP | Store text with MIDI-files. ["1"] |
bMultirestAudible | SOUND | Multiple rests take time ["1"] |
bPercussionMapping | SOUND | enable MusiCAD percussion pitch change ["1"] |
bPrependAcc | SETUP | enter accidentals beforehand (before click/<Enter> ["0"] |
bQuantGrace | SETUP | Use gracenotes when quantisizing ["0"] |
bQuantLead | SETUP | Use starting rest when quantisizing ["1"] |
bQuantShort | SETUP | Use shortening when quantisizing ["0"] |
bQuantTriads | SETUP | Use triads when quantisizing ["0"] |
bReadLayout | SETUP | Read layout from MusiCAD files ["1"] |
bShowAutoRests | LAYOUT | Synthesizer (0=GM 1=Base 2=Extended): ["0"] |
bShowBorder | LAYOUT | Draw rectangle around each page within margin. ["0"] |
bShowHints | SETUP | Show hint-information (like this) ["1"] |
bShowMarks | SETUP | Show edit marks as little blue squares ["1"] |
bStichAudible | SOUND | cue-notes and alike audible ["0"] |
bSwing | SOUND | Swing-timing ( 1/16+1/16 becomes 1/12+1/24 ) ["0"] |
bTaskPanelVisible | SETUP | Show taskpanel ["0"] |
bTickLines | SETUP | use ticklines when creating a chordscheme ["0"] |
bTrackEdit | SETUP | Track last edit bar on redisplay. ["0"] |
bTracking | SETUP | Track melody during play. ["1"] |
bTruncLines | LAYOUT | Do not write bar lines for unused part of line ["1"] |
bUseColor | SETUP | Use color when printing ["1"] |
bWarnBlock | SETUP | Emit warning before commiting changes on blocks. ["0"] |
bWideScroll | SETUP | Scroll editwindow by measure or by line ["0"] |
bWriteLayout | SETUP | Write layout when saving MusiCAD files ["1"] |
colBorder | SETUP | Bordercolor on-screen in page-mode ["clGray"] |
colCursorBK | SETUP | 2nd color for notecursor ["clRed"] |
colCursorFG | SETUP | 1st color for notecursor ["clYellow"] |
colDimmed | SETUP | Color for dimmed elements (grey-notes/invisible text) ["clGray"] |
colFrame | SETUP | Framecolor around notes (if enabled) ["clGray"] |
colMark | SETUP | Markercolor ('blue rectangles') ["clBlue"] |
colNote | SETUP | Default notecolor on-screen ["clBlack"] |
colPaper | SETUP | Papercolor on-screen ["clWhite"] |
colSelect | SETUP | Selectioncolor ('Blocks') ["clRed"] |
colStaff | SETUP | Staffcolor / ledgerline color on-screen ["clGray"] |
fBarnumbers | LAYOUT | Textlayout for bar-numbers ["(Name=Arial, Size=5, Y=7)"] |
fBarText | LAYOUT | Textlayout for staff-height text ["(Size=24, Y=-4)"] |
fBase | LAYOUT | Base layout ["(Name=Times New Roman, Size=8, Style=fsNormal, Color=clDefault, X=0, Y=0, Align=taLeft)"] |
fChords | LAYOUT | Textlayout for chordsymbols like Am, C#7, Ddim etc. ["(Y=-10)"] |
fCoda | LAYOUT | Textlayout for DaCapo-constructions ["(Size=14, Y=8)"] |
fDynamics | LAYOUT | Textlayout for dynamisc symbols ["(Size=12, X=-2, Y=-10, Align=taRight)"] |
fFC | LAYOUT | centered text within footer ["()"] |
fFingering | LAYOUT | Symbol layout for fingering-signs ["(Name=Times New Roman, Size=5)"] |
fFL | LAYOUT | left text within footer ["()"] |
fFR | LAYOUT | Right text within footer ["()"] |
fHC1 | LAYOUT | Upper text centered within header ["(Size=20, Y=-2)"] |
fHC2 | LAYOUT | Middle text centered within header ["(Size=15, Y=-1)"] |
fHC3 | LAYOUT | Lower text centered within header ["(Size=10)"] |
fHdrCenter | LAYOUT | Base header layout center ["()"] |
fHdrFoot | LAYOUT | Base voetlayout ["()"] |
fHdrNext | LAYOUT | Base non-first-page headerlayout ["()"] |
fHdrOther | LAYOUT | Base header layout other ["(Name=Arial)"] |
fHeaders | LAYOUT | Base header layout ["(Size=8, Style=fsNarrow, Y=0)"] |
fHL1 | LAYOUT | Upper text left within header ["()"] |
fHL2 | LAYOUT | Middle text left within header ["()"] |
fHL3 | LAYOUT | Lower text left within header ["()"] |
fHR1 | LAYOUT | Upper text right within header ["()"] |
fHR2 | LAYOUT | Middle text right within header ["()"] |
fHR3 | LAYOUT | Lower text right within header ["()"] |
fInfo | LAYOUT | fsItalic, Y=8)"] |
fInfo1 | LAYOUT | Textlayout used for directions 1 (dolce etc.) ["()"] |
fInfo2 | LAYOUT | Textlayout used for directions 2 (instrument releated like arco etc.) ["(Y=-8)"] |
fInfo3 | LAYOUT | Textlayout used for directions 3 (cue marks [A] etc.) ["(Name=Arial, Size=11, Style=fsNormal, Color=clRed, Y=7)"] |
fISpecific | LAYOUT | Symbollayout for instrument-specific signs like upbow, stress etc. ["()"] |
fLyrics | LAYOUT | Base textlayout for any lyrics ["(Name=Arial, Style=fsNarrow)"] |
fLyrics1 | LAYOUT | Textlayout for lyrics 1 (i.e. 1st verse) ["()"] |
fLyrics2 | LAYOUT | Textlayout for lyrics 2 (i.e. 2nd verse) ["(Y=-12)"] |
fLyrics3 | LAYOUT | Textlayout for lyrics 3 (i.e. 3rd verse) ["(Y=-16)"] |
fLyrics4 | LAYOUT | Textlayout for lyrics 4 (i.e. refrain) ["(Y=-20)"] |
fMultiRest | LAYOUT | Textlayout for ciphers of multirest ["(Name=Times New Roman, Size=12, Style=fsBold, Y=5, Align=taLeft)"] |
fMusic | LAYOUT | Baselayout for music-symbols ["(Name=MusiCAD, Size=10, Align=taCenter)"] |
fNC | LAYOUT | centered text within header on non-first pages ["()"] |
fNL | LAYOUT | Left text within header on non-first pages ["()"] |
fNR | LAYOUT | Right text within header on non-first pages ["()"] |
fOrnaments | LAYOUT | Symbol layout for ornamentation signs(mordenten, trillers etc.) ["(Size=12)"] |
fSectionCenter | LAYOUT | centered text in melodiesecties ["(Size=15, Y=15)"] |
fSectionLeft | LAYOUT | left text in melodysections ["(Y=13)"] |
fSectionRight | LAYOUT | Right text text in melodiesecties ["(Y=13)"] |
fSelection | LAYOUT | Textlayout for repeatsigns (prima volta, 1-tjes) ["(Size=8, Y=7)"] |
fSpecial | LAYOUT | Textlayout for special music symbols ["()"] |
fSymbol | LAYOUT | Symbol layout for manually inserted MusiCAD symbolen ["()"] |
fTempo | LAYOUT | Textlayout for tempoaanduidingen ["(Name=Arial, Size=7, Y=8)"] |
fText | LAYOUT | Base textlayout ["(Size=7, Y=-8)"] |
fVoiceHdr | LAYOUT | Textlayout for partdescription at first line ["(Size=6, X=15, Y=7)"] |
fVoiceHdrX | LAYOUT | Textlayout for partdescription at non-first lines ["(Size=0)"] |
ibar linePct | LAYOUT | Weight of bar lines shown as percentage (100=default) ["100"] |
iBarNumbering | LAYOUT | Choose bar-number locations ["0"] |
iBarsLeadIn | SOUND | Number of lead-in ticks ["0"] |
iBassNoteHi | SETUP | Highest note within auto-bas: ["B3"] |
iBassNoteLo | SETUP | Lowest note within auto-bas: ["C2"] |
iBottomStaffHeight | LAYOUT | Reserved extra whitespace below staff, usually 0 ["0"] |
iChannel | SOUND | MIDI channel number (1-16) ["0"] |
iChordNoteHi | SETUP | Highest note within auto-chord: ["C6"] |
iChordNoteLo | SETUP | Lowest note within auto-chord: ["C4"] |
iContinuationBars | DATA | Continue part with paattern used in the muber of bars given. ["0"] |
iCurBar | DATA | Choose bar-number locations ["1"] |
iCurID | DATA | Additional distance between two staffsystems within a score (verticalunits): ["0"] |
iDrumNote1 | SETUP | Drum note at 1st beat ["35"] |
iDrumNote2 | SETUP | Drum note at after beat ["42"] |
iDrumNote3 | SETUP | Alternating drum note ["38"] |
iDrumProgram | SETUP | Drumprogram to be used for percussion ["0"] |
iDrumSplit4 | SETUP | language to be used in menu's and dialogs ["1"] |
iDynAccent | SOUND | accent (MIDI-volume) ["10"] |
iDynAccentExtra | SOUND | marcato (MIDI-volume) ["20"] |
iDynBar | SOUND | Extra volume added to each first note within a bar ["10"] |
iDynCluster | SOUND | Extra volume added to each first note within a cluster ["15"] |
iDynCresc | SOUND | crescendo, louder, increasing volume (MIDI-volume) ["30"] |
iDynDeCresc | SOUND | decrescendo/diminuendo, softer, decreasing volume (MIDI-volume) ["-30"] |
iDynF | SOUND | forte, loud (MIDI-volume) ["110"] |
iDynFF | SOUND | fortissimo, zeer loud (MIDI-volume) ["120"] |
iDynFFF | SOUND | fortissimo possibile, as loud as possible (MIDI-volume) ["127"] |
iDynMF | SOUND | mezzo forte, medium loud (MIDI-volume) ["100"] |
iDynMP | SOUND | mezzo piano, medium soft (MIDI-volume) ["90"] |
iDynP | SOUND | piano, soft (MIDI-volume) ["80"] |
iDynPP | SOUND | pianissimo, very soft (MIDI-volume) ["60"] |
iDynPPP | SOUND | pianissimo possibile, as soft as possible (MIDI-volume) ["40"] |
iDynRFZ | SOUND | rinsforzando, stressed notecluster (MIDI-volume) ["-20"] |
iDynSFZ | SOUND | sforzato, stressed single note (MIDI-volume) ["20"] |
iDynStart | SOUND | Starting volume if no dynamics were used ["100"] |
iDynTenuto | SOUND | tenuto (MIDI-volume) ["10"] |
iEditX | SETUP | Note width in pixels during edit mode: ["5"] |
iEditY | SETUP | Note height in pixels during edit mode: ["4"] |
iFermatePercent | SOUND | Tempo adjust percent for fermates ["200"] |
iFixedGraceDur | SOUND | Fixed embellishement duration (set 0 for relative duration) ["1/32"] |
iHdrDist | LAYOUT | Distance between header and first line ["4"] |
iHeaderSize | LAYOUT | Height of text above melody in vertical units: ["12"] |
iHelpLinePercent | LAYOUT | Length of ledger lines (100% is default) ["100"] |
iIndentStaff1 | LAYOUT | Staffindentation for first line. ["0"] |
iIndentStaffNext | LAYOUT | Staffindentation for other lines. ["0"] |
iInstrument | SOUND | MIDI-instrumentname, <F3> or rightclick to change. [""] |
iLineFillPct | LAYOUT | Justify lines if at least this percentage of the line has beenfilled: ["60"] |
iLineSpacing | LAYOUT | Additional distance between two staffsystems within a score (verticalunits): ["4"] |
iMaxBackups | SETUP | Maximum number of backup copies per melody: ["2"] |
iMaxDistPct | LAYOUT | Largest allowable notedistance used behind longest note (at 100% all notes are at least two dots apart) ["100"] |
iMaxGlobalUndo | SETUP | Levels of global undo ["10"] |
iMaxMenuFiles | SETUP | Maximum nr of previously opened files to be shown in File-menu ["5"] |
iMenuOptions | SETUP | Options_dialog ["0"] |
iMenuPart | SETUP | Score_dialog ["0"] |
iMetronomeVolume | SETUP | Volume of MIDI-drum-metronome: ["100"] |
iMIDIInputType | SETUP | Sound output device ["0"] |
iMIDIInputVolume | SETUP | MIDI-Input volume ["100"] |
iMIDILevel | SETUP | Synthesizer (0=GM 1=Base 2=Extended): ["0"] |
iMIDIOutputType | SETUP | Sound input device ["0"] |
iMIDIShiftIn | SETUP | Number of semitones to be shifted while recording: ["0"] |
iMIDIShiftOut | SETUP | Number of semitones to be shifted while playing: ["0"] |
iMIDISplit | SETUP | MIDI-split point: ["C3"] |
iMinDistPct | LAYOUT | Smallest allowable notedistance used behind shortest note (at 100% all notes are at least half a dot apart) ["100"] |
iMinTieDistance | LAYOUT | Draw slur instead of tie when notes are closer than prescribed (in 1/100 units) ["350"] |
iNBarsPerLine | LAYOUT | Maximum bars per line (0=auto) ["0"] |
iNLinesPerPage | LAYOUT | Maximum lines per page (0=auto): ["0"] |
iNrstaff lines | LAYOUT | Nr of lines per staff, usually 5 ["5"] |
iPageBottom | LAYOUT | mm whitespace use as bottom margin ["15"] |
iPageFillPct | LAYOUT | Justify page if at least this percentage of the page has beenfilled: ["75"] |
iPageLeft | LAYOUT | mm whitespace use as left margin ["20"] |
iPageLen | LAYOUT | Length of paper in mm ["297"] |
iPageRight | LAYOUT | mm whitespace use as right margin ["10"] |
iPageTop | LAYOUT | mm whitespace use as top margin ["15"] |
iPageWidth | LAYOUT | Width of paper in mm ["210"] |
iPan | SOUND | Panning, position within stereoview: 0=left, 64=center, 127=right ["64"] |
iPlayDur | SETUP | Audible note duration when entering notes ["100"] |
iPrnOrient | LAYOUT | Paper Orientation (Portrait/Landscape) ["0"] |
iPrnPaperSize | LAYOUT | Papersize ["4"] |
iQuantNote | SETUP | Choose shortest allowable note (1/8) ["1/16"] |
iQuantRest | SETUP | Choose shortest allowable rest (1/16) ["1/16"] |
iQuantSmall | SETUP | Choose shortest allowable unit (1/32: Note>=Rest>=Unit. ["1/32"] |
iRepeatCount | SOUND | : and :| too: ["1"] |
iResizeOrphanPct | LAYOUT | 'Orphans' are bars on a non-filled line. and should expanded with the same amount as filled lines ["10"] |
iSaveInterval | SETUP | Time in minutes between two automatic backup copies: ["3"] |
iScaleHorizontal | LAYOUT | Horizontal scalingfactor (100% is default) ["100"] |
iScaleVertical | LAYOUT | Vertical scalingfactor (100% is default) ["100"] |
iSizeFtr | LAYOUT | Footer height at bottom of page. (0 for auto): ["8"] |
iSizeHdrNext | LAYOUT | Header height of other pages.(0 for auto): ["8"] |
iSizeHdrSection | LAYOUT | Minumum height to be reserved for use with sections ["20"] |
iStaffDist | LAYOUT | Whitespace between two staffs within a score ["2"] |
iStaffHeight | LAYOUT | Height of a staff in vertical units: ["20"] |
istaff linePct | LAYOUT | Weight of staff lines shown as percentage (100=default) ["100"] |
iStemLengthPct | LAYOUT | Length of stems (100% is default) ["100"] |
iStemLinePct | LAYOUT | Weight of stems shown as percentage (100=default) ["100"] |
iStichNoteOffset | SOUND | Stichnote play offset: ["0"] |
iSwing | SOUND | Swing-timing used for long-short clusters 0='1:2', 1='2:3' ["0"] |
iTempo | SOUND | Tempo in quarternotes per minute. ["120"] |
iTopStaffHeight | LAYOUT | Reserved extra whitespace above staff, usually 0 ["0"] |
iTransposition | SOUND | Transposition of part (play nr of semitones higher then notated) ["0"] |
iUndoLimit | SETUP | # of undo buffers: ["30"] |
iVolume | SOUND | Base playbackvolume of part, >=0, <=127 ["100"] |
iWidthPostbar line | LAYOUT | Extra white space after bar lines (1/100 units) ["50"] |
iWidthPostCKMchange | LAYOUT | Extra white space after key (1/100 units) ["50"] |
iWidthPrebar line | LAYOUT | Extra white space before bar lines (1/100 units) ["50"] |
sArea | DATA | Area [""] |
sArranger | DATA | Arranger of the piece ($A) [""] |
sComment | DATA | Comment [""] |
sComposer | DATA | Composer of the piece ($C) [""] |
sCopyright | DATA | Copyright holder ($R) [""] |
sCountry | DATA | Coubtry of origin [""] |
sDirGS | SETUP | GhostScript directory ["$eGS"] |
sFC | LAYOUT | Footer text center ["$R"] |
sFilGSDest | SETUP | Filename to be used with Postscript ["$tMCPRINT.PS"] |
sFilSjabloneABC | SETUP | Layout template for imported ABC files [""] |
sFilSjabloneMC | SETUP | Layout template for MusiCAD-files without self-contained layout [""] |
sFilSjabloneMIDI | SETUP | Layout template for imported MIDI files [""] |
sFilSjabloneTXT | SETUP | Layout template for imported text files ["$eDEFTXT.MSJ"] |
sFL | LAYOUT | Footer text left ["$M $Q $D"] |
sFR | LAYOUT | Footer text right ["$<Pg $#"] |
sGSCommand | SETUP | GS Print command ["GS550.EXE"] |
sGSDevice | SETUP | GhostScript 'device' to be used ["mswinpr2"] |
sGSPrintOptions | SETUP | Parameters for GS printing ["-q -dBATCH -dNOPAUSE"] |
sHC1 | LAYOUT | Header text center top ["$T"] |
sHC2 | LAYOUT | Header text center middle ["$S"] |
sHC3 | LAYOUT | Header text center bottom ["$F"] |
sHL1 | LAYOUT | Header text left top ["$P$ $G$ $z"] |
sHL2 | LAYOUT | Header text left middle ["$H$ $W"] |
sHL3 | LAYOUT | Header text left bottom ["$@ $m"] |
sHR1 | LAYOUT | Header text right top ["$v$ $X"] |
sHR2 | LAYOUT | Header text right middle ["$C$ $Z"] |
sHR3 | LAYOUT | Header text right bottom ["$A$ $Y"] |
sInfo | DATA | Info [""] |
sMode | DATA | Mode [""] |
sNC | LAYOUT | Next page header text center ["$T"] |
sndAlert | SETUP | Sound for low priority warning ["SystemAsterisk"] |
sndClick | SETUP | Sound for lowest priority warning ["SystemDefault"] |
sndError | SETUP | Sound for high priority error ["SystemExclamation"] |
sndFatal | SETUP | Sound for fatal error ["SystemHand"] |
sndWarn | SETUP | Sound for warning ["SystemQuestion"] |
sNL | LAYOUT | Next page header text left ["$P"] |
sNR | LAYOUT | Next page header text right ["$X"] |
sOriginal | DATA | Originele auteur [""] |
sPlayOrder | DATA | Order [""] |
sSendToEMail | SETUP | SEND TO. ["Muziek Archief MusiCAD <muzamus@dse.nl>"] |
sSource | DATA | Source of the tune ($Z) [""] |
sStyle | DATA | Styledescription [""] |
sSubTitle | DATA | First subtitle ($S) [""] |
sSubTitle2 | DATA | Second subtitle ($F) [""] |
sTextWriter | DATA | Songwriter of the lyrics ($W) [""] |
sTitle | DATA | Main title of musicpiece ($T) [""] |
sTuning | DATA | Tuning (like Bflat instruments) (X) [""] |
sTxtArea | DATA | Description for "Area" [""] |
sTxtArranger | DATA | Description for "Arranger" ["arr: "] |
sTxtComment | DATA | Description for "Comment" [""] |
sTxtComposer | DATA | Description for "Composer" [""] |
sTxtCopyright | DATA | Description for "Copyright" ["\Oc "] |
sTxtCountry | DATA | Description for "Country" [""] |
sTxtInfo | DATA | Description for "Info" [""] |
sTxtMode | DATA | Description for "Mode" [""] |
sTxtOriginal | DATA | Description for "Original author" ["org: "] |
sTxtPlayOrder | DATA | Description for "Order" [""] |
sTxtSource | DATA | Description for "Source" [""] |
sTxtStyle | DATA | Description for "Style" [""] |
sTxtSubTitle | DATA | Description for "Subtitle" [""] |
sTxtSubTitle2 | DATA | Description for "Seconf subtitle" [""] |
sTxtTextWriter | DATA | Description for "Songwriter" ["txt: "] |
sTxtTitle | DATA | Description for "Title" [""] |
sTxtTuning | DATA | Description for "Tuning" [""] |